Q: Do I have to have my hoist disassembled each year during the annual inspection?
Integrity Crane And Hoist: Not necessarily. The level at which your machinery is broken down depends on findings during the initial inspection of the crane hoist. Your inspector will let you know if further evaluation is needed. If you do have to disassemble your equipment, make sure to reference the OEM manual throughout the process.
Q: Do I have to have a professional engineer inspect and/or repair my crane, hoist, and other lift equipment?
Integrity Crane And Hoist: No. ASME standards dictate that a “qualified person” must perform these inspections. It does not have to be a professional engineer. However, ASME does necessitate that this individual has extensive knowledge, experience, and training and further has been recognized with either a degree or certification in inspection and repairs. This person must additionally have previously demonstrated their knowledge in the subject matter and ability to identify and solve problems.
Q: Am I required to maintain records of equipment inspection and repairs?
Integrity Crane And Hoist: If you use top-running machinery with a top-running hoist, then yes. These require monthly inspections of components, including the chain, hooks, and wire rope. The individual performing the inspections is required to note the day of the inspection and sign each inspection document.
Q: Is it possible for the rated load of my crane to be different from that of its connected trolleys and hoists?
Integrity Crane And Hoist: Yes. According to ASME B30.16, if components have different capacities, then the total load of the system must be recorded as that of the lowest-rated part.
Q: Am I required to label my monorail system?
Integrity Crane And Hoist: Rated load markings are not necessarily required. However, for safety reasons, it is wise to have these clearly visible from the ground floor. ASME does make recommendations on crane hoist markings, and you can read more about those in ASME B30.16. Your Integrity Crane And Hoist technician can also help answer any questions you may have.
Located just south of Nashville in Columbia, Tennessee, Integrity Crane And Hoist offers OSHA inspections, repair and testing, and 24/7 emergency services for crane hoists, runways, and safety devices.